As an Amazon Associate I earn from qualifying purchases.
Baoblaze ATMEGA32U4 USB Development Board Module Compatible with MCU Beetle Arduino LeonardoBaoblaze
- Digital i/o Pins: 10 Clock speed: 16 MHz. Operating voltage: 5V DC. 1 piece atmega32u4 usb mini development Board, 3 Pieces Pin Header. Microcontroller ATMEGA32U4.
2. D DOLITY
USB ATMEGA32U4 Mini Development Board For Arduino Leonardo NEWD DOLITY
- Clock speed: 16 MHz. Pwm channels: 4. Operating voltage: 5V DC. Microcontroller ATMEGA32U4. Digital i/o Pins: 10 .
Milageto ATMEGA32U4 Beetle USB Mini Development Board Module ForMilageto
- Operating voltage: 5V DC. Digital i/o Pins: 10 Pwm channels: 4. Microcontroller ATMEGA32U4. Clock : 16 MHz.
KingBra 1pcs Leonardo R3 development Board Compatible Arduino Revision R3 Atmega32u4 with Free USB Cable for arduinoKingBra
- The mega is 100 percent compatible with Arduino and most shields designed for the Arduino. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Leonardo r3 pwm channel: 7 d3, d11, D6, d5, d9, d10, D13. Leonardo r3 input voltage: 7-12v, operating Voltage:5V, SRAM:2. 5 kb atmega32u4. Leonardo r3 flash memory: 32 kb aTmega32u4 of which 4 KB used by the bootloader.
KEYESTUDIO Pro Micro Board ATmega32u4 LEO w/USB for ArduinoKEYESTUDIO
- We also added a pTC fuse and diode to protect power supply circuit. In choosing test program IDE version must be advanced or equal than the 1. 03 version. Operating voltage is 3. 3v and working frequency is 8MHz, which can accept external supply voltage up to DC 16V.
The anode of power supply board must be connected to the "RAW". It is compatible with all skills, including four analog inputs, five PWM pins, twelve digital inputs/outputs and hardware serial port Rx and Tx.
|Height||0.41 cm (0.16 Inches)|
|Length||3.33 cm (1.31 Inches)|
|Weight||0.03 kg (0.06 Pounds)|
|Width||1.8 cm (0.71 Inches)|
WINGONEER Virtual Keyboard Leonardo R3 USB ATMEGA32U4 microcontrollerWINGONEER
- Eeprom: 1 KB. Flash: 32 kb, 4kb of which is used by the bootloader. Working voltage: 5V DC. Controller: ATmega32u4. Clock speed: 16 MHz.
TECNOIOT 2pcs ATmega32U4 Board LilyPad USB Microcontroller Pro Micro Development BoardTECNOIOT
- Easy operationthis allows the for lilypad for arduin usb to appear to a connected computer as a mouse and keyboard, in addition to a virtual CDC serial / COM port. Design compactit contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a battery to get started.
The for lilypad for arduin usb differs from previous for LilyPad boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a separate USB-to-serial adapter.
It also has other implications for the behavior of the board. High performancemicrocontroller atmega32u4 operating voltage 3. 3v input voltage 3. 8v to 5v digital i/o pins 9 pwm channels 4 analog input channels 4 dc Current per I/O Pin 40 mA Flash Memory 32 KB ATmega32u4 of which 4 KB used by bootloader SRAM 2.
5 kb atmega32u4 eeprom 1 kb atmega32u4 Clock Speed 8 MHz. It has 9 digital input/output pins of which 4 can be used as PWM outputs and 4 as analog inputs, an 8 MHz resonator, a JST connector for a 3. 7v lipo battery, a micro USB connection, and a reset button. Lilypad32u4this lilypad board is a microcontroller board based on the atmega32u4. Fast delivery fast and high quality delivery of Spain buying in TECNOIOT.